Bird Control - Bird Pest Away Australia Australian suppliers of safe effective bird pest control products Non chemical products for bird control
Pest-Away Australia

The Bird Deterrent Specialists
Australian suppliers of safe effective bird pest control products.
Birds control
Bird Pest Repeller
 
Home | What's New! | Products | Ordering Info | Shipping | About Us | Contact Us | Hints & Tips | Sitemap | Links | Review the cartReview Shopping Cart | What bird spikes to use? What bird spikes to use?

T-Points - Premium Range
Stainless Steel Bird Spikes
Bird Proofing Products Australian Distributors of Bird Control Deterrent Barrier Products


Bird Proofing with Stainless Steel Bird Spikes

Bird spikes are one of the easiest bird proofing products to install and when made from stainless steel, mounted into a polycarbonate base, they are one of the more durable methods too.

These spikes interfere with the birds ability to land (without causing them any injury) and depending upon which model, will deter birds from perching, roosting or even nesting on various types of structures.

There are three brands of stainless steel bird spikes available:
T-Points Bird Spikes - Stainless Steel Bird Spikes

Pest-Away Australia is the Asia Pacific distributor for the T-Points range of stainless steel bird spikes. The T-Points Premium range has been developed from years of experience in the bird proofing industry.

All the T-Points bird spike models are made from marine grade (316G) stainless steel wire and have a UV Light Inhibited polycarbonate base (both proven necessary features in Australian conditions).

These two features, alone, combine to make one of the most durable stainless steel/flexible polycarbonate base spike combinations available on the Asia Pacific market.

T-Points Premium Features (all models):
  • Marine grade stainless steel wire (316G) - 1.4mm diameter
  • UV Light Inhibited polycarbonate base (tested)
  • 10 year manufacturers warranty on the polycarbonate base
  • Fixing is usually by silicone based adhesive (ordered separately)
    AVISIL or AVIFIX
  • Option to fit spikes to guttering (with gutter clips - ordered separately)
  • Sold per lineal metre
  • 'Snap Lines' to custom size a section
  • Pre-formed holes for screw fixing (if adhesive not desired)
T-Points S35 Model - Medium Bird Spikes

Swallows, sparrows and pigeons (all small and medium sized birds)

The spike pattern is a 3-2-3 type configuration. The spike base is wider at the 3 spikes (40mm), 25mm at the 2 spikes and the 'throat' of the base is a narrow 12mm.

The S35 model is the medium width spike (spike spread). For ledges of around 100mm-170mm in depth.

For narrower ledges (<100mm) you would use the PAA S24 Narrow Bird Spike model.

Wider ledges (>170mm) would use the T-Points R35 model (seen lower down on this web-page).

We recommend using a neutral base adhesive for fixing the spikes - Such as AVISIL or AVIFIX.

Specifications:

SPIKE Dimensions
Height 110mm
Spread 120mm
Density 23mm
Diameter 1.4mm

BASE Dimensions
Width 12/40/25mm
Length 333mm
T-Points S35 - Features:
  • All small and medium sized birds
  • For ledges 100mm-170mm (up to 180mm protection area)
  • Also suited to piping and conduit (up to 110mm dia.)
  • Sold per metre (three sections to the metre)
  • Spike tip cut flat for safety
  • Spike diameter at 1.4mm
  • Thirty Five spikes per section (high spike density)
  • Base has "snap-lines" to custom fit the section
  • Base has multiple pre-drilled holes for fixing by screws if desired
  • Polycarbonate base is UV protected and is flexible
  • 316 marine grade stainless steel spikes

Stainless Steel Bird Spikes
T-Points S35 Model - per metre

$14.30 (AUD - GST Inc.)

Qty:

Low Stock. Please Contact us.Low Stock. Please Contact us.  Contact Us


pest bird deterrent products

T-Points R35 Model - Wide Bird Spikes

Swallows, sparrows, pigeons, seagulls or larger (all small, medium and larger sized birds).

The R35 model is the largest spike in the T-Points range (widest spike spread and highest spike height). For ledges of around 170mm (and greater) in depth.

The spike pattern is a 3-2-3 type configuration. The spike base is wider at the 3 spikes (40mm), 25mm at the 2 spikes and the 'throat' of the base is a narrow 12mm.

For narrower ledges (<100mm) you would use the PAA S24 Narrow Bird Spike model.

For medium width ledges (100mm-170mm) you would use the T-Points S35 model (seen above on this web-page).

We recommend using a neutral base adhesive for fixing the spikes - Such as AVISIL or AVIFIX.

Specifications:

SPIKE Dimensions
Height 133mm
Spread 190mm
Density 23mm
Diameter 1.4mm

BASE Dimensions
Width 12/40/25mm
Length 333mm
T-Points R35 - Wide Bird Spikes Features:
  • All small, medium and larger sized birds
  • For ledges 100mm-170mm (up to 180mm protection area)
  • Also suited to larger piping and conduit (> 110mm dia.)
  • Sold per metre (three sections to the metre)
  • Spike tip cut flat for safety
  • Spike diameter at 1.4mm
  • Thirty Five spikes per section (high spike density)
  • Base has "snap-lines" to custom fit the section
  • Base has multiple pre-drilled holes for fixing by screws if desired
  • Polycarbonate base is UV protected and is flexible
  • 316 marine grade stainless steel spikes

Stainless Steel Bird Spikes
T-Points R35 Model - per metre

$20.90 (AUD - GST Inc.)

Qty:


pest bird deterrent products

T-Points R24 - Medium Pigeon Spikes

The R24 model is a pigeon only spike.

This model has a different base design and spike pattern to the S35 & R35 models. It is designed to be a cost effective pigeon spike.

The spike pattern is the more typical 2 left and 2 right styled configuration and the spikes are stackable making packaging easier.

A simple spike for a medium sized ledge to bird proof against pigeons.

We recommend using a neutral base adhesive for fixing the spikes - Such as AVISIL or AVIFIX.

Specifications:

SPIKE Dimensions
Height 133mm
Spread 155mm
Density 27mm
Diameter 1.4mm

BASE Dimensions
Width 40mm
Length 333mm
T-Points R24 - Medium Pigeon Spikes Features:
  • For pigeons
  • Suitable for ledges 130mm-190mm in depth
  • Also suitable for wider piping (120mm-180mm dia.)
  • Sold per metre (with 3 sections per metre)
  • Spike tip cut flat for safety
  • Spike diameter at 1.4mm for smaller birds
  • Twelve spikes per section (24 spike tips)
  • Base has "snap-lines" every set of spikes
  • Base has pre-formed holes every set of spikes
  • 316 marine grade stainless steel
  • Each section is stackable which allows for lower storage & shipping costs

Stainless Steel Bird Spikes
T-Points R24 Model - per metre

$14.30 (AUD - GST Inc.)

Qty: Sorry! Currently Out of StockSorry! Currently Out of Stock


pest bird deterrent products

T-Points S24 - Narrow Spikes

The S24 model is for narrow ledges - Such as 'C' or 'Z' Section, Universal Beam flanges and other Roof Members (or downpipes) that have a narrow area for the birds to perch.

Ideal for small and medium sized birds such as swallows and pigeons.

(The T-Points S24 model supersedes the earlier PAA S24 model - Essentially just a name change).

The spike pattern is simpler than the larger S35 and R35 models (mentioned above) to keep it to a narrow profile and is a 2-2-2 "V" type configuration.

The spike base is also narrower than the S35 and R35 models. But the same high quality UV-Light Inhibited polycarbonate.

The spike pattern will protect an area that is up to 100mm wide.

We recommend using a neutral base adhesive for fixing the spikes - Such as AVISIL or AVIFIX.

Specifications:

SPIKE Dimensions
Height 90mm
Spread 47mm
Density 26mm
Diameter 1.3mm

BASE Dimensions
Width 22/12mm
Length 330mm
T-Points S24 - Narrow Spikes Features:
  • Sold per metre (with 3 sections per metre)
  • Spike tip cut flat for safety
  • Spike diameter at 1.3mm for smaller birds
  • Twelve spikes per section (24 spike tips)
  • Base has "snap-lines" every second set of spikes
  • Base has pre-drilled holes every second set of spikes
  • Base is uniquely narrow and flexible
  • Each base section has an interlock tab for easier row assembly
  • 316 marine grade stainless steel
  • Each section is stackable which allows for lower storage & shipping costs

Narrow Stainless Steel Bird Spikes
T-Points S24 Model - per metre

$12.65 (AUD - GST Inc.)

Qty:

High quality neutral curing adhesives - AVISIL or AVIFIX - are specially recommended for the installation of bird spike systems.


T-Points Bird Spikes | Stainless Steel Bird Spikes | AVIPOINT Bird Spikes | AVIPOINT Marine Grade | Bird Spike Adhesives | Polycarbonate Bird Spikes

To Top of Page
To Top of Page


Home | What’s New! | Products | Ordering Info | Shipping | About Us | Contact Us | Hints & Tips | Sitemap | Links | Review the cartReview Shopping Cart


 
Sparrow and pigeon control

©2000- - The Bird Deterrent Specialists
Australian Suppliers of Bird Pest Control Products.
Scaring birds away from crops, vegetable gardens, orchards, vineyards
farms, buildings, golf courses, airports and aquaculture, etc.